|
Holland Seam Panel
MANUFACTURER:
HOLLAND
SHEET METAL, INC.
7450
Industrial Rd.
Florence,
KY 41042
Phone:
(859) 525-0887
Fax:
(859) 525-0689
DESCRIPTION:
Basic
Uses:
HOLLAND
SEAM panels with the WIND-LOK™ application are
used for roofing on both new construction and re-roof
applications. This is a structural panel and can be
fastened directly to purlins as well as to solid underlayment.
HOLLAND SEAM panels can be tapered for placement on
a conical roof.
Composition
and Materials:
Holland
Seam panels are roll-formed from .032, .040 Aluminum
or 24 gauge G90 galvanized Steel. 16 oz. Copper is
available subject to minimum quantities and lead times.
22 gauge and 26 gauge G90 galvanized Steel are available
in select colors.
Sizes
and Profiles:
HOLLAND
SEAM panels are 11" wide (MRD110), 15" wide
(MRD150) or 19-1/4" wide (MRD194). Panel lengths
are cut to customer specifications, with a minimum
of 4’ and a maximum to transportation limitations.
Specify with or without stiffening ribs.
Color
and Finish:
A
choice of 27 colors is available in a Kynar 500®
or Hylar 5000® based finish. (Request color chart
or chips). An anodized finish is available in clear
or bronze. Texture may be smooth or stucco embossed.
TECHNICAL DATA
Kynar
500® or Hylar 5000® based finishes tested
by PPG Industries for:
Dry
Film Thickness (Nominal): ASTM D-1400-94, D-1005-95
Gloss:
ASTM D532-89
Pencil
Hardness: ASTM D-3363-92a
Flexibility
T-Bend: ASTM D- 4145-83
Flexibility
Mandel: ASTM D-522-93a
Adhesion:
ASTM D-3359-95a
Reverse
Impact: ASTM D-2794-93
Abrasion
Resistance, Falling Sand Test: ASTM D-968-93
Mortar
Resistance: AAMA 2605, Test #7.7.2
Detergent
Resistance: ASTM D-2248-93
Acid
Pollutants Resistance: ASTM D-1308-87; AAMA 2605
Acid
Rain Resistance Test: Kesternich, Sulfur dioxide cyclic
test
Alkali
Resistance: ASTM D-1308-87
Salt
Fog: ASTM B 117-95
Humidity
Test: ASTM D-2247-94,
D-714-87
Color
Retention, Weatherometer Test: ASTM D-822-96
Color
Retention, Florida Exposure: ASTM D-2244-93
Chalking
Resistance: ASTM D-4214-89
Panel
testing/ratings:
Uplift/Load
data
UL790,
UL580, Class 90
Class
A & B Fire Rating
ASTM
E-1592
ASTM
E-283, ASTM E-330
ASTM
E-331
ASTM
B 209 Aluminum
ASTM
A 653/A775 Steel
FSR
Flame Spread Rating
Field
Tested and Approved
Load
Tables available upon request.
AVAILABILITY AND COST
Availability:
HOLLAND
SEAM panels are readily available through Holland
Sheet Metal, Inc. A complete line of accessories in
matching or coordinating colors is available to complete
a project. Valleys, Ridge Caps, Gable and Eave trims
are formed to customer specifications. Ridge Caps,
Soffit or other Trim Designs can be lanced for ventilation.
Coil stock or flat sheet can be provided for field
fabrication of custom flashings.
Cost:
Contact
Holland Sheet Metal, Inc.
WARRANTY
The
fluoropolymer, Kynar 500® or Hylar 5000® ,
based finish carries a twenty (20) year limited warranty
against chipping, cracking, peeling, chalking and
fading.
INSTALLATION
With
the lock and seam being an integral part of the panel,
there are no caps or strips to install. Field seaming
of the panel is not required. The panel is snapped
onto the previously installed panel, a clip is hooked
over the "leg" of the panel, and this is
concealed by the batten or seam of the consecutive
panel to allow for expansion and contraction. Recommended
minimum slope is 2 in 12.
MAINTENANCE
HOLLAND
SEAM panels are virtually maintenance free. The high
quality finish will not fade, chalk, crack, peel,
warp or rot. Surface residue may be easily removed
by conventional cleaning methods. Minor scratches
may be touched up with a matching paint, available
from the manufacturer.
TECHNICAL SERVICES
Complete
technical information and literature is available
from Holland Sheet Metal, Inc. Holland Sheet Metal,
Inc. will assist with design ideas and shop drawings.
|
